Note: Tests indicate that QoS does not seem to work when Address object types are set as FQDN. While this device may be fully functional on the tested and/or current firmware version, it is possible newer revisions will cause disruptions in service or make a device fully compliant with the required settings for hosted VoIP services where it was previously not. Keep in mind different firmware versions will interact with hosted VoIP services in different ways.
At the time of article creation, this device was in a known working state on the firmware used. The purpose of this article is to provide a sample configuration.
Disable Consistent NAT and SIP Transformations.The /24 at the end of the IP addresses means that the subnet mask is 255.255.255.0. Once you have confirmed that the linksys is configured correctly setup your wireless.Ī quick example of the network settings would be Third, connect your laptop to a LAN port on the linksys and make sure you can get out to the internet. On the linksys set the gateway to the 10.10.10.X gateway, set the DNS to whatever your DNS is for your ISP and turn on DHCP. Second, plug the linksys WAN port into the TZ170 OPT port (make sure you don't plug this port into the network as that could cause issues). If you need more information on how to setup the IP's let me know. For example if your office uses 192.168.0.X then use something like 10.10.10.X. Sorry I haven't gotten back to you I thought peralesa would walk you through this since it was his idea but.įirst, on the sonicwall TZ170 loginto the box and configure the OPT on a different subnet.
0 kommentar(er)
